Electrified Jeep Wagoneer, expected by the end of 2025.

Posted on September 12, 2024
General
Electrified Jeep Wagoneer, expected by the end of 2025.

Sterantis on Wednesday announced a series of production updates at its three Michigan plants, which will include an electrified Jeep Wagoneer by the end of 2025.

The automaker announced that it will invest about $97.6 million to prepare its Warren Truck Assembly Plant for the electrified Wagoneer. The plant also produces gasoline-powered Wagoneers, and the two will share a production line.

Sterantis described the electrified Wagoneer as one of “four Jeep EVs” planned worldwide by the end of 2025, but the vehicle is not a pure battery-electric vehicle, but a series that will share technology with the 2025 Ram 1500 Ramcharger It is believed to be a plug-in hybrid.

The 1500 Ramcharger is based on Sterantis' STLA frame platform designed for hybrid and electric vehicles with body-on-frame construction, and the electrified Wagoner would be similar.

Powertrains are also likely to be common to both vehicles: the 1500 Ramcharger combines a 92 kwh battery with a 3.6-liter V-6 engine that functions purely as a generator. Ram claims the truck's electric drive system has a peak output of 663 hp and a range of 145 miles with the battery alone and 690 miles with the battery and gas engine combined. Similar numbers are expected for the electrified Wagoner.

News of the electrified Wagoner was first mentioned in a UAW document released in November 2023. The document also indicated that an electric Wagoneer would be launched in 2027 and that gasoline-powered Wagoneers would be refreshed in 2025 and 2027. Given the timing, these refreshes will likely coincide with the arrival of electrified and electric Wagoneers.

Other announcements by Sterantis on Wednesday include confirmation that the 1500 Ramcharger and 2025 Ram 1500 REV electric trucks will be produced at the Sterling Heights plant where the gas 1500 is built.

Sterantis also announced that the Dundee engine plant will be used to manufacture components for the STLA frame and STLA large platform, in addition to new four-cylinder engines, including a 1.6-liter turbo four that will be used in the 2025 hybrid powertrain to be used for the new STLA platform.

You may also like

2026 Chevrolet Corvette Zora Spotted: C8 Hybrid Flagship Rides Through the Ring in New Video
2026 Chevrolet Corvette Zora Spotted: C8 Hybrid Flagship Rides Through the Ring in New Video

If you thought the 1,064-hp 2025 Corvette ZR1 was the end of the performance road for the C8-generation Corvette, you were wrong.Chevrolet has plans t...

Sep 13

2025 Cadillac Escalade IQ VIN 001 to be auctioned for charity
2025 Cadillac Escalade IQ VIN 001 to be auctioned for charity

Reservations for Cadillac's highly anticipated 2025 Escalade IQ full-size SUV are already available. However, those wishing to purchase the first exam...

Sep 13

Porsche Receives Patent for Six-Stroke Engine
Porsche Receives Patent for Six-Stroke Engine

Unless you drive an early Saab, your car probably has a four-stroke engine. Porsche, however, believes that more strokes would be better.The automaker...

Sep 22

Trending

Sterantis is developing a deployable table for front seats
Sterantis is developing a deployable table for front seats

Sterantis could make the drive-through experience a little easier with folding tables for the driver and passenger.Such tables are the subject of a pa...

Sep 21

GM boss Corvette will never be its own brand.
GM boss Corvette will never be its own brand.

A few years ago, there were rumors that General Motors was considering using the Corvette nameplate as an independent brand completely separate from C...

Sep 20

Porsche Receives Patent for Six-Stroke Engine
Porsche Receives Patent for Six-Stroke Engine

Unless you drive an early Saab, your car probably has a four-stroke engine. Porsche, however, believes that more strokes would be better.The automaker...

Sep 22